Silvercrest LHL 2000 B1 Operating Instructions Manual page 11

Handling and operation
GB
Operating switch
Temperature regulator
Ventilator operation
Heating operation
Setting the temperature
8
In this chapter you receive important information for the handling and operation
of the appliance.
The operating switch
4
heating levels on and off .
The temperature regulator
By turning it clockwise a higher temperature is set,
by turning it anticlockwise a lower temperature will
be set.
♦ Ensure that the operating switch
♦ Turn the temperature regulator
♦ Set the operating switch
♦ The fan heater turns on and the operating light
♦ If the appliance is being taken into service for the fi rst time or if you want
to reset the desired temperature, turn the temperature regulator
wise to the right.
♦ Set the operating switch
♦ Turn the temperature regulator
♦ When the room has reached the desired temperature, slowly turn the
temperature regulator
This means that the heating element is now switched off .
♦ The heating element is now switched on and off automatically by the
temperature regulator
has 4 positions and switches the ventilator and the
= Appliance switched off
= only ventilator
= Ventilator and heating level 1
= Ventilator and heating level 2
is at position 0 (off ).
4
clockwise to the right.
6
to the position
4
to the desired operating mode (I or II).
4
6 clockwise to the right.
anti-clockwise until a slight click sound is heard.
6
and the temperature is kept constant.
6
6 is steplessly adjustable.
.
is red.
5
6 clock-
LHL 2000 B1