Scanning From The "Scanner And Camera Wizard" (Windows Xp) - Sharp AR-5618 Operation Manual

SCANNING FROM THE "Scanner and Camera Wizard"
(Windows XP)
The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner
and Camera Wizard" lets you scan an image without using a WIA-compliant application.
1
Place the original that you wish to
scan on the document glass/SPF/
RSPF.
For information on setting an original for
scanning, refer to "SCANNING USING THE
KEYS ON THE MACHINE"
2
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Scanners
and Cameras".
3
Click the "SHARP AR-XXXX" icon and
then click "Get pictures" in "Imaging
Tasks".
4
Click the "Next" button.
5
Select the "Picture type" and click the
"Next" button.
(p.59).
The "Scanner and
Camera Wizard" will
appear.
To adjust the resolution, picture type,
Note
brightness and contrast settings, click the
"Custom settings" button.
6
Specify a group name, format and
folder for saving the image, and
then click the "
Next
7
When scanning ends, the following
screen will appear. Select the next
task that you wish to perform, and
then click the "Next" button.
8
Click the "Finish" button.
SCANNER FUNCTIONS
" button.
JPG, BMP, TIF or PNG
can be selected for the
format. To begin
scanning, click the "Next"
button.
If you are ready to end
the session, click
"Nothing. I'm finished
working with these
pictures".
The "Scanner and
Camera Wizard" closes
and the scanned image is
saved in the specified
folder.
67
5