Connection Setup; 3G Modem Mode - D-Link DWR-530 User Manual

Section 2 - Installation
1. Move the router/modem selection switch to modem mode.
2. Make sure the DWR-530 is turned off, and all LEDs are off.
3. Connect the 3.75G HSUPA Router to your computer with the included USB cable.
4. Turn on the DWR-530 by pressing and holding the power button until all the LEDs light
up.
(To turn off the DWR-530, press and hold the power button until all the LEDs turn off.)
5. Windows Users: The D-Link Connection Manager installation program should start
automatically. Follow the prompts to install the D-Link Connection Manager. If you see
a prompt about whether to install a driver, click Continue Anyway.
If the installation program does not start, open My Computer, open the drive labeled
DWR-530, and double-click the Setup.exe file.
Mac Users: A window will appear showing the contents of the DWR-530. Double-click
on the .pkg file and follow the prompts to install the D-Link Connection Manager.
6. Enter the PIN code for the SIM card.
7. Click the Connect icon in the Connection Manager.
8. You can now use the DWR-530 3.75G HSUPA Router as a 3G modem.
Note: You have to install the Connection Manager software when using the DWR-530 for the first time. After successful installation, you
can configure its USB modem and Wi-Fi router basic settings.
D-Link DWR-530 User Manual

Connection Setup

3G Modem Mode

Modem/Router switch
in modem position
7