Table of Contents
Advertisement
Section 3 - Configuration
1. Check Enabled, if you want to enable MAC address filtering.
Otherwise, check Disabled.
2. Enter up to 10 MAC addresses that can access the device. Only
these devices will be allowed to access your wireless network;
all other devices will be denied access.
3. Click Apply to save the settings.
1. If you want to enable Auto APN, tick the check box.
2. Enter a profile name, username, password, and APN description.
3. Set the Reconnect Mode to Always On, On Demand, or Manual.
4. Enter a maximum idle time in minutes or choose 0 for infinite.
5. Enter a PIN code.
6. Click Apply to save the settings.
D-Link DWR-530 User Manual
Advanced Settings
Internet Settings
17
Advertisement
Table of Contents
