Beko WDA1056143H User Manual page 29

Table of Contents

Advertisement

Operating the product
3. If you want to turn up the volume, press the light button on the lower right corner of the display when "VOLUME ON" is selected. Light
goes off and "Set" appears on the display.
4. If you want to turn down the volume, press the light button on the lower right corner of the display when "VOLUME OFF" is selected. Light
goes off and "Off" appears on the display.
5.22 Memory (Favourite
You can create a favourite programme by saving frequently used programme and other settings. Use this function when you want to select
quickly the same settings you use for the laundry that you wash regularly.
Favourite programme will remain at the factory set programme until you make a new favourite programme setting.
5.22.1 To store a new favourite programme:
1. Select the desired programme, temperature, spin speed, soiling degree and auxiliary function.
2. Keep the Favourite button pressed for 3 seconds.
3. Countdown as "Storing favourite 3-2-1" appears on the display.
C
NOTE
¾ If storing is not successful, "Favourite not saved" appears on the display.
5.22.2 To select a favourite programme:
1. Press Favourite button. "Favourite selected" appears on the display.
2. Programme and other settings saved as favourite appear on the display.
3. Press Start / Pause button to start your Favourite programme.
5.23 Your machine is equipped with a "Standby Mode"
In case of not starting any programme or waiting without making any other operation when the machine is turned on by On/Off button and while
it is in selection step or if no other operation is performed approximately 2 minutes after the programme you selected has come to an end, your
machine will automatically switch to energy saving mode. Brightness of indicator lights will decrease. Also, if your product is equipped with a
display showing the programme duration, this display will completely turn off. In case of rotating the Programme Selection knob or pressing any
button, lights and display will restore to their previous condition. Your selections made while exiting the energy saving mode may change. Check
the appropriateness of your selections before starting the programme. Readjust if necessary. This is not a fault.
User's Manual
programme setting
)
29 / EN

Advertisement

Table of Contents
loading

Table of Contents