Beko WDA 105614 User Manual page 37

Too much foam forms in the machine. (**)
• Improper detergents for the washing machine are being used. >>> Use detergents appropriate for the washing machine.
• Excessive amount of detergent is used. >>> Use only sufficient amount of detergent.
• Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store in excessively hot
places.
• Some meshed laundry such as tulle may foam too much because of their texture. >>> Use smaller amounts of detergent for this
type of item.
• Detergent is put in the wrong compartment. >>> Put the detergent in the correct compartment.
• Softener is being taken early. >>> There may be problem in the valves or in the detergent dispenser. Call the Authorized Service
Agent.
Foam is overflowing from the detergent drawer.
• Too much detergent might be used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of
the detergent drawer.
• Put detergent into the machine suitable for the programmes and maximum loads indicated in the "Programme and consumption table".
When you use additional chemicals (stain removers, bleaches and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme. (*)
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent
usage. >>> Use recommended amount of detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. >>>
CAUTION
A
If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized
Service Agent. Never try to repair a nonfunctional product yourself.
Clean the drum regularly. See, 6.2