How To Install - LG LWC1031DAG Manual

3.4-1 HOW TO INSTALL(Installation kit not included models)
1. Remove the screws which fasten the cabinet
at both sides and at the back.
2. Slide the unit from the cabinet by gripping the
base pan handle and pulling forward while
bracing the cabinet.
3. Remove EPS Material.
4. Slide the unit into the cabinet.
CAUTION: For security purpose, reinstall screw at
cabinet's sides.
5. Attach the front grille to the cabinet by
inserting the tabs on the grille into the tabs on the fornt
of the cabinet. Push the grille in until it snaps into
place.
6. Lift the inlet grille and secure it with a screw through
the front grille.
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Screw
- 14 -
Shipping screws
EPS Material
Power cord
Screw
LGE Internal Use Only