Table of Contents
Advertisement
Viewing 3D images
3D Eyewear set
●
TY-EW3D10W
3D Eyewear
●
Use either nose pad A or B for your preference.
●
3D Eyewear can be worn over vision correction glasses.
Part names and functions
Battery cover
●
When using for the first time, remove the insulating sheet.
●
To replace the battery
Lenses - Liquid Crystal Shutter
Controls the images for 3D viewing.
●
The left and right liquid crystal shutters
are alternately opened and closed in
time with the images on the TV screen to
achieve the 3D effect.
●
Do not apply pressure to or scratch
the surface of the liquid crystal
shutter.
22
Specialised band
Pull the insulating sheet
Insulating sheet
"Replacing the battery" (p. 23)
Infrared receiver
Receives infrared signals from the TV.
●
3D Eyewear is controlled by receiving infrared signals from the
TV, which allows you to view 3D images.
●
Do not soil the infrared receiver section or attach stickers etc. to it.
Nose pad installation section
If required, attach the nose pad.
●
To attach the nose pad
3D Eyewear
Nose pad A
Nose pad B
"Attaching the nose pad" (p. 24)
Specialised band attaching parts
If required, attach the specialised band.
●
To attach the band
"Attaching the specialised band" (p. 24)
Power button of the 3D Eyewear
(bottom side of the 3D Eyewear)
Switches the 3D Eyewear on or off.
●
Press the button for about 1 second to turn the power
on. The indicator lamp lights for about 2 seconds and
then goes off.
●
To turn the power off, press the button for about
1 second again. The indicator lamp flashes 3 times,
then the 3D Eyewear turns off.
Power button
●
If the 3D Eyewear does not receive any signals from
the TV for about 5 minutes, the 3D Eyewear will be
turned off automatically.
3D Eyewear case
Indicator lamp
Advertisement
Table of Contents
