Table of Contents
Advertisement
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting
any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket
outlet first.
There are some restrictions on placement for viewing 3D images. For details
TV only
AC 220 - 240 V,
50 / 60 Hz
(
)
TH-P65VT20P:
AC 110 - 240 V,
50 / 60 Hz
Mains lead (supplied)
●
Do not put the RF cable close to the mains lead to avoid noise.
●
Do not place the RF cable under the TV.
●
To obtain optimum quality picture and sound, an aerial, the correct cable (75
correct terminating plug are required.
●
If a communal aerial system is used, you may require the correct connection cable and plug
between the wall aerial socket and the TV.
●
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct
aerial system for your particular area and the accessories required.
●
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
●
VIERA Link connection
●
Other equipment connection
●
Read the manual of the equipment, too.
8
Connecting aerial
■
Mains Lead
Rear of the TV
Push until both side
tabs click
●
p. 61
p. 66 and p. 67
Make sure that
the mains lead is
securely fixed.
To remove from the TV:
tabs
Press both tabs and pull on
mains connector to release
p. 21 and p. 26
Aerial
RF cable
Ω coaxial) and the
Advertisement
Table of Contents
