Beko 2012 CXY User Manual page 31

Machine does work. No
light is on.
The machine did not
start after the program
was selected and the
'Start/Pause/Cancel'
button was pressed.
"Washing" and "Start/
Pause/Cancel" lights
are flashing after the
program is started.
The "Lid" light is
flashing.
The plug might not be
plugged in the mains outlet.
Fuse may have blown.
Electricity may be cut off.
The "On/Off" button might
have not been pressed.
The front door may be ajar.
Water may have been cut off.
It shows the safety period until
the door lock is opened.
31
Plug should be checked.
Fuse should be checked.
Power should be checked.
This button must be pressed.
You can restart your machine
by pressing the "Start/Pause/
Cancel" button for a short
time after ensuring that the
water is not cut off.
For your safety, the front
door can only be opened 2
minutes after the program is
completed. The "Lid" light will
flash during this period.
EN