Philips HD8841 User Manual page 66

ENGLISH
64
Machine actions
Coff ee does not have enough
crema (see note).
No coff ee is brewed, coff ee
is brewed slowly or drop by
drop (see note).
Coff ee leaks out of the dis-
pensing spout.
No hot water or steam is
dispensed.
The descaling cycle cannot
be completed.
The selected product was not
saved.
Causes
The blend is unsuitable, coff ee is
not freshly roasted or the grind is
too coarse.
The coff ee grind is too fi ne.
The circuit is not primed.
The brew group is dirty.
The dispensing spout is dirty.
The machine circuit is clogged by
limescale.
The dispensing spout is clogged.
The hole of the steam/hot water
wand is clogged.
The Classic Milk Frother is dirty.
The circuit is not primed.
The machine circuit is clogged by
limescale.
The water dispensed for the rinse
cycle is not enough.
You exited the setting of the prod-
uct via the " " icon.
Note:
These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case, wait until
the machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
Solutions
Change coff ee blend or adjust
the grind setting as explained in
the "Adjusting the Ceramic Coff ee
Grinder" chapter.
Change coff ee blend or adjust
grinding as explained in the "Adjust-
ing the Ceramic Coff ee Grinder"
chapter.
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" chapter).
Clean the dispensing spout and its
holes.
Descale the machine.
Clean the dispensing spout and its
holes.
Clean the hole of the steam wand
using a pin.
Make sure that the machine is
off and has cooled down before
performing this operation.
Clean the Classic Milk Frother.
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Descale the machine.
Press the on/off button and follow
the instructions described in the
"Interruption of the Descaling Cycle"
section.
You need to confi rm and save the de-
sired product quantity via the " " icon.