Stereo Reception In Analogue Cable Tv Channel Mode; Picture Format - Sharp AQUOS LC-29LE440M Operation Manual

Stereo reception in
analogue cable TV
channel mode
You can see the each signal type you selected on the
TV-screen when you press .
When 2-channel sound reception is available, you
can select your preferred audio with the AUDIO
I/II.
Each time you press AUDIO I/II, the sound channel
will switch to the alternative channel available.
NOTE
• In case of bad reception, the stereo sound also can be
disturbed.
• The sound multiplex displayed when pressed is user
selected sound. It may not the same one which is from the
program being broadcasted

Picture Format

Picture Size
The required picture format can be set by pressing the
PICTURE SIZE button. Press PICTURE SIZE until
the required format is displayed.
You move through the following formats when you
press the button: 4:3, 16:9, Cinema, Real.
Other formats
Press PICTURE SIZE until the desired size is reached.
4:3
The picture is displayed in 4:3
format with black bars to the
right and left.
16:9
The width of the picture will be zoomed evenly.
Cinema
Use Cinema to increase a small 4:3 letterbox signal.
4:3 Letterbox picture increased to Cinema format.
10
J3PI2101B_EN.indd 10 J3PI2101B_EN.indd 10
Real
All images are displayed on the
TV screen of 16:9 ratio without
overscanning.
Selectable picture mode
TV - 4:3, 16:9, Cinema
AV - 4:3, 16:9, Cinema
Component (SD) - 4:3, 16:9, Cinema
Component (HD) - 4:3, 16:9
HDMI (SD) - 4:3, 16:9, Cinema, Real
HDMI (HD) - 4:3, 16:9, Real
PC - 4:3, 16:9
Media (Movie) - 4:3, 16:9, Cinema
Media (DivX) - 4:3, 16:9, Cinema, Real
5/27/2013 1:57:22 PM 5/27/2013 1:57:22 PM