Sharp AQUOS LC-29LE440M Operation Manual page 13

Other convenience functions (Continued)
TIME
Sleep Timer
Auto Sleep
OSD Timer
OPTION
OSD Language
TT Language
Aspect Ratio
Blue Screen
Key Lock
First Time Installation
Reset
Software Update (USB)
DivX Reg. Code
Deactivation
SCREEN
Auto Adjust
Horizontal Pos.
Vertical Pos.
Clock
Phase
12
J3PI2101B_EN.indd 12 J3PI2101B_EN.indd 12
Selected Items
Off/10/20/30/60/90/120/180/240min
Off/3/4/5 H
5/10/15/20/25/30 S
On / Off
On / Off
Setup hint
Sleep Timer switches the TV to standby after a defi ned period
of time.
To cancel the Sleep Timer, set to "Off".
When the Set and Remote key operation are not operated
with specifi ed period by this setting(3/4/5 H),
the power status is changed to stand by mode automatically.
OSD is cleared automatically as per this setting.
"CH LIST" OSD will disappear after 10 seconds in spite of
•
this setting.
The OSD which is linked with the OSD Timer setup is
•
limited to the OSDs for the overall Menu and the Input
Select.
See page 8.
See page 9.
See page 10.
On: You can set the TV to automatically change to a blue
screen and mute the sound if the signal is weak or absent.
You can lock the panel buttons to prevent your settings from
being changed accidentally (by children, for example).
When the Key Lock is in On, all control buttons on the TV panel
do not operate.
See page 7.
Press or ENTER to enter the Reset to default screen.
Press to select "Yes". Reset the TV function will now begin.
When you proceed the Reset function and all item in the
•
PICTURE, SOUND, TIME, OPTION will back to factory
value. At this time, TV channel preset will not reset.
Upgrade the software with the USB drive , check with your
SHARP authorized Service Center.
In order to play DivX VOD (Video On Demand) content on
®
this unit, you fi rst need to register the unit with your DivX
VOD content provider. You do this by generating a DivX
registration code, which you submit to your provider.
You can fi nd the deregistration code (8-10 digit). Please use
this code to deactivate on DivX
®
"Horizontal Pos.", "Vertical Pos.", "Clock" and "Phase" are
adjusted automatically as per the input PC video signal.
• When PC-input mode was selected and a PC-signal was
input, Auto Adjust will be performed automatically.
To adjust the horizontal placing of the image.
To adjust the vertical placing of the image.
Eliminates the vertical (Clock) interfering lines.
Eliminates the horizontal (Phase) interfering lines.
®
VOD
®
website.
5/27/2013 1:57:22 PM 5/27/2013 1:57:22 PM