Removing The Power-Switch Board - Dell Vostro 24-5460 Owner's Manual

Installing the Stand Cage
1. Align the stand cage with the screw holes and tighten the screws to secure it to the computer.
2. Install:
a. back cover
b. stand
3. Follow the procedures in

Removing the Power-Switch Board

1. Follow the procedures in
2. Remove:
a. stand
b. back cover
3. Perform the following:
a. Press the locking tab that secures the power-switch to the computer [1].
b. Lift the power-switch board to release it from the slot [2].
4. Lift the lock tab and disconnect the power-switch cable from the power-switch board [1.2].
14
After Working Inside Your
Before Working Inside Your
Computer.
Computer.