Installing The Camera Module; Removing The System Board - Dell Vostro 24-5460 Owner's Manual

Installing the Camera module

1. Place the camera module into its slot.
2. Press the locking tab until it clicks to the chassis.
3. Secure the camera cable using the securing clips.
4. Connect the camera cable to the system board.
5. Install:
a. back cover
b. stand
6. Follow the procedures in

Removing the System Board

1. Follow the procedures in
2. Remove:
a. stand
b. back cover
c. heatsink assembly
d. stand cage
e. WLAN card
3. Disconnect the following cables from the system board:
a. display-assembly cable
b. system-fan cable
c. hard-drive cable
d. hard-drive power cable
e. speaker cable
f. camera cable
4. Lift the tab and disconnect the LVDS and power-switch cables.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
19