Selecting Operation Mode - D-Link DAP-1155 Quick Installation Manual

DAP-1155 Quick Installation Guide

Selecting Operation Mode

By default, the access point mode is specified for the device. If you need to use
the device as a router, on the advanced settings page, select the Router
) of the Switch device mode switch. In the
position (
opened dialog box, click the OK button to save new settings and immediately
reboot the access point.
Also you can change the operating mode of the device on the System /
Device mode page. To do this, on the page, select the Router value from the
Work mode list, and click the Change button. In the opened dialog box,
click the OK button and wait until the device is rebooted.
After the device has rebooted, the quick settings page in the router mode
opens.
19