Access Point Mode - D-Link DAP-1155 User Manual

DAP-1155 Wireless N 150 Access Point & Router
User Manual

Access Point Mode

The quick settings page displays general information on the access point and its software (the
version and the date of the firmware, the IP address of the device, the name of the WLAN, etc.).
On the page you can run the Wi-Fi Wizard, quickly get to some pages of the web-based interface,
search for a specific page, or switch to the advanced settings section.
To upgrade the firmware of the access point, left-click the current firmware version (the right
column of the Firmware version line). After clicking the line, the System / Firmware
upgrade page opens (for the detailed description of the page, see the Firmware Upgrade section,
page 83).
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the
right column of the Support line). After clicking the line, the e-mail client window for sending a
new letter to the specified address opens.
To edit the access point's local interface parameters, left-click the IP or MAC address of the local
interface (the right column of the LAN IP line or LAN MAC line correspondingly). After clicking
the line, the page for editing the LAN interface opens (for the detailed description of the page, see
the LAN section, page 49).
Figure 22. The quick settings page in the access point mode.
Page 33 of 215
Installation and Connection