D-Link DAP-1155 User Manual page 184

DAP-1155 Wireless N 150 Access Point & Router
User Manual
You can specify the following parameters:
Parameter
Destination network
Destination netmask
Gateway
Metric
Via Interface
Click the Save button.
To edit an existing route, click the relevant route link. On the opened page, change the needed
parameters and click the Save button.
To remove an existing route, click the relevant route link. On the opened page, click the Delete
button.
Figure 142. The page for adding a static route.
A destination network to which this route is assigned.
The destination network mask.
An IP address through which the destination network can be accessed.
The filed is displayed when the <Auto> value is selected from the Via
Interface drop-down list.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface through which the destination network can be
accessed from the drop-down list. If you have selected the <Auto>
value of this drop-down list, the access point itself sets the interface on
the basis of data on connected networks.
Page 184 of 215
Configuring Device (Router Mode)
Description