Wps - D-Link DAP-1155 User Manual

DAP-1155 Wireless N 150 Access Point & Router
User Manual

WPS

On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and
select a method used to easily add wireless devices to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
If the access point's WLAN is splitted into parts (the value 2 , 3 , or 4 is selected from the
!
MBSSID drop-down list on the Wi-Fi / Common settings page), the WPS function can
be used only for the first part of the WLAN (the first value from the BSSID drop-down
list).
Before using the function you need to configure one of the following authentication types:
!
Open with no encryption, WPA-PSK or WPA2-PSK with the AES or TKIP+AES
encryption method (on the Wi-Fi / Security settings page).
Figure 49. The page for configuring the WPS function.
Page 62 of 215
Configuring Device (Access Point Mode)