DAP-1155 Wireless N 150 Access Point & Router
User Manual
NTP Client
On the System / NTP client page, you can configure automatic synchronization of the system
time with a time server on the Internet.
To enable automatic synchronization with a time server:
1. Select the Enabled checkbox.
2. Select your time zone.
3. Specify the needed NTP server in the NTP servers field or leave the server specified by
default.
4. Click the Change button.
When the access point is powered off or rebooted, the system time is reset to the default
!
value. If you have set automatic synchronization for the system time, the internal clock of
the device will be configured after connecting to the Internet.
Figure 161. The System / NTP client page.
Page 208 of 215
Configuring Device (Router Mode)