Net; Lan - D-Link DAP-1155 User Manual

DAP-1155 Wireless N 150 Access Point & Router
User Manual

Net

In this menu you can configure basic parameters of the local area network of the access point.

LAN

To configure the access point's local interface, proceed to the Net / LAN page.
If needed, edit the basic settings of the local interface.
Parameter
IP Address
Netmask
When needed settings are configured, click the Save button.
In the DHCP server section, you can configure the built-in DHCP server of the access point. In
the access point mode, the DHCP server is disabled by default.
Figure 37. Basic settings of the local interface.
The IP address of the access point in the local subnet. By default, the
following value is specified: 192.168.0.50.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
Figure 38. The section for configuring the DHCP server.
Page 49 of 215
Configuring Device (Access Point Mode)
Description