D-Link DAP-1155 User Manual page 148

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Parameter
MAC
Figure 116. The page for creating a new connection. The IP and Miscellaneous sections.
Parameter
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Enable RIP
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button (
MAC address of the network interface card (of the computer that is
being used to configure the access point at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the access
point's LAN at the moment. To do this, select the relevant value
from the drop-down list (the field will be filled in automatically).
IP
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Page 148 of 215
Configuring Device (Router Mode)
Description
Description
) to set the