Replacing The Shaving Heads - Philips S5280 User Manual

ENGLISH
22
C
7 After cleaning, place the cutter back into
the comb with the cutter legs pointing
downwards.
C
8 Put the shaving head back into the shaving
head holder.
Make sure the projections of the shaving head
fit exactly into the recesses on the shaving head
holder.
C
9 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
1
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
2
Do not place the shaving head holder on a
surface, as damage may occur.
10 Repeat the process for the other two
cutters and combs.
C
NOTE: Each retaining ring has two recesses and
two projections that fit exactly in the projections
and recesses of the shaving head holder. Make sure
you hear a 'click' indicating the retaining ring is fixed
into place.
C
11 Reinsert the hinge of the shaving head
holder into the slot of the shaving unit.
Close the shaving head holder (click).
Cleaning the Trimmer
Clean the trimmer after each use.
C
1 Attach the trimmer to shaver.
2 Turn shaver ON.
C
3 Rinse the trimmer under hot water. BUT
BE CAREFUL TO TEST WATER FIRST SO
AS NOT TO BURN OR SCALD HANDS.
C
4 Turn the shaver OFF. Shake off excess
water and allow trimmer to air dry
thoroughly.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with one drop of mineral
oil every 6 months.

Replacing the Shaving Heads

◗ Replace the shaving heads once a year for
optimal shaving results.
◗ Replace damaged or worn shaving heads with
model SH50 Philips Norelco shaving heads
only.
ENGLISH
23