Advertisement
Problem
I replaced
the shaving
heads, but the
replacement
reminder is still
showing.
A shaving
head symbol
has suddenly
appeared on the
display.
Water is leaking
from the bottom
of the appliance.
Possible cause
You have not reset
the appliance.
This symbol is
a replacement
reminder.
During cleaning,
water may collect
between the inner
body and the
outer shell of the
appliance.
Solution
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one (see 'Replacement').
Then separate the cutter
from its guard and rinse
each matching set under
the tap. After rinsing, place
the cutter back into its
corresponding guard. Finally,
put the shaving heads back
into the shaving head holder
(see 'Replacement').
Reset the appliance by
pressing the on/off button
for approx. 7 seconds.
Replace the shaving heads
(see 'Replacement').
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
33
English
Advertisement
