3D Mode Selection - Panasonic TX-40CS630E Ehelp

3D Mode Selection

You can change the viewing mode between 2D and 3D.
1. Display the menu with MENU.
2. Select Picture > 3D Settings
3. Select the mode and press
Items for 3D Mode Selection
●
3D / 2D:
Displays the appropriate image as you desire without selecting 3D format.
This mode may not work properly depending on the source image
●
format. In this case, select the appropriate 3D format manually.
■
To select 3D format manually
When the format is not selected properly using
manual setting.
1. Display 3D Mode Selection (Manual)
operation.
2. Select the mode and press
Original:
Displays the source image as it is.
Use to identify the format type of the source image.
●
Watching > 3D > Source image format
Side by Side - 3D
Top and Bottom -
Displays the mode you select.
For digital signals
●
2D→3D:
Converts 2D images into 3D.
Please note the 3D images appear slightly different from the
●
originals.
Using this function for profit-making purposes, or publically showing
●
images converted from 2D to 3D in places such as shops, hotels,
etc. may infringe on the rights of the copyright holder protected
under copyright law.
> 3D Mode
OK to set.
vary depending on the condition.
with
OK to set.
/ Side by Side - 2D /
2D:
- 89 -
and press OK to access.
3D / 2D mode, use this
(red) during above
Top and Bottom - 3D /