3D Settings - Panasonic TX-40CS630E Ehelp

3D Settings

1. Display the menu with MENU.
2. Select Picture > 3D Settings
3. Select one of the following items and press
3D Mode / 3D Detection
Adjustment / L/R Picture Swap
4. Set the item and press
To exit the menu screen
●
EXIT
3D Mode
(3D / 2D)
Selects the viewing mode between 2D and 3D.
To select the 3D format manually, set
●
Watching > 3D > 3D Mode Selection
3D Detection
(On (Advance) / On
Selects whether to switch to the 3D mode automatically or not.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
To view 3D images without any notifications and operations, set to
●
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
Not valid when 3D Detection
●
and press
/ 3D Signal Message
/ Edge Smoother
OK to store.
/ Off)
is set to
- 90 -
OK to access.
OK to access.
/ 2D→3D Depth
/ Safety Precautions
3D Mode Selection (Manual).
On (Advance)
/ 3D
On