Table of Contents
Advertisement
RUGGEDCOM RSG2300
Installation Guide
g
Auto-crossover and auto-polarity.
h
Typical distance. Dependent on the number of connectors and splices.
i
RMS 1 minute.
Section 4.4.2
Copper Gigabit Ethernet (1 Gbps) Port Specifications
NOTE
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
• All optical power numbers are listed as dBm averages.
• F51 transceivers are rated for -40 to 85 °C (-40 to 185 °F).
Fixed Gigabit Transceivers
Connector
RJ45
j
Auto-Negotiating
k
Shielded or unshielded.
l
Auto-crossover and auto-polarity.
m
Typical distance. Dependent on the number of connectors and splices.
n
RMS 1 minute.
SFP Gigabit Transceivers
Connector
RJ45
o
Auto-Negotiating
p
Shielded or unshielded.
q
Auto-crossover and auto-polarity.
r
RMS 1 minute.
Section 4.5
Fiber Optic Ethernet Port Specifications
The following sections list specifications of the optical transceivers used in the dual-port modules available for the
RUGGEDCOM RSG2300:
•
Section 4.5.1, "10FL Ethernet Optical Specifications"
Copper Gigabit Ethernet (1 Gbps) Port Specifications
j
Duplex
Cable Type
FDX/HDX
> CAT-5
o
Duplex
Cable Type
FDX/HDX
> CAT-5
k
l
Wiring Standard
TIA/EIA T568A/B
p
q
Wiring Standard
TIA/EIA T568A/B
Technical Specifications
Maximum
Isolation
m
Distance
100 m (328 ft)
Maximum Distance
Isolation
100 m (328 ft)
Chapter 4
n
1.5 kV
r
1.5 kV
31
Advertisement
Table of Contents
