Kenwood DNX9170DABS Instruction Manual page 21

Inserting the MAP SD
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Insert the SD card into the slot until it
clicks.
4
Press the [G] button.
1
Insert the microSD card into the slot until
it clicks.
NOTE
• A dummy microSD card is inserted as the slot
cover. Remove it before using and keep it in
an appropriate place.
Ñ
Remove the SD card
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press the [G] button.
1
Push the microSD card until it clicks and
then remove your finger from the card.
The card pops up so that you can pull it
out with your fingers.
Basic Operations
21
English