Installing The Dvd-Rom Reader In A Host Pc - NEC DV-5500A User Manual

10

Installing the DVD-ROM reader in a host PC

Note
Refer to the guidebook included with your personal computer for instruc-
tions on installing the DVD-ROM reader. This chapter gives one example
of installation.
1. Attach the mounting rails to both the left and right sides of the DVD-
2. Turn off the computer, other peripherals and unplug all the cords and
3. Slide the disk drive out approximately 50 ~ 70mm (2 ~ 3 in.), but do
4. Slide the DVD-ROM reader into the computer until it is even with the
DISK DRIVE
DVD-ROM
READER WITH
MOUNTING RAILS
EDV5500A.PM5
ROM reader.
cables. Then remove the computer cover, face plate, mounting clips,
and keeper bracket. Refer to the Guide to Operations that came with
your computer for help with this step.
not disconnect the cables.
disk drive.
11 99.4.26, 5:32 PM