D-Link DES-6000 Firmware Update Manual

D-link des-6000: product support bulletin

Hide thumbs Also See for DES-6000:

Download this manual See also: User Manual

How to Update the Firmware

Update the PROM code:

Modify the configure file (25.cfg) for PROM code updating

Specify the directory path and image file name for PROM code.

Code_type=PROM

Image_file="d:\des6000\6000prom.b13"

#Code_type=RUNTIME

#Image_file="d:\switch\des6000\des6000.b41"

#Code_type=CONFIG

#Image_file="g:\d-link\des-60~1\basic_25.bc"

Save your modification and Enable your TFTP server.

Enter console program; select Update Firmware and Configuration

Files in the main menu.

Set the Software Update Mode to "Network".

Specify the IP address of your TFTP server.

In the Configuration File field, Set Use Config Files to "Enable"

In File Name field, specify the path and file name of config file. The

following screen appears:

Written by: Simon Hsu

Dept. Technical Support

Updated: March 23, 2001

Page 1: How To Update The Firmware
Code_type=PROM Image_file="d:\des6000\6000prom.b13" #Code_type=RUNTIME #Image_file="d:\switch\des6000\des6000.b41" #Code_type=CONFIG #Image_file="g:\d-link\des-60~1\basic_25.bc" Save your modification and Enable your TFTP server. Enter console program; select Update Firmware and Configuration Files in the main menu. Set the Software Update Mode to “Network”. Specify the IP address of your TFTP server.
Page 2 Press RESET SWITCH TO START UPDATE to initiate the update sequence. Restart the switch. Check the version of PROM code. is it the correct version you want to update? Update the Runtime code: Modify the configure file (25.cfg) for RunTime code updating Specify the directory path and image file name for RunTime code.
Page 3 Press RESET SWITCH TO START UPDATE to initiate the update sequence. Restart the switch. Check the version of PROM code. is it the correct version you want to update? Written by: Simon Hsu Dept. Technical Support Updated: March 23, 2001...