Setting Up The Ip Phone Manually - D-Link VoiceCenter DPH-125MS User Manual

Section  - Installation
This section will guide you in setting up the DPH-125MS IP Phone using the phone's built in Setup Menu. Please
Refer to the Hardware Overview on page 6 for the key reference. Although this device has a built-in Web Interface,
it is suggested that you do not make any changes manually. All configuration changes should be made through the
Microsoft Response Point
®
not compatible with the DVX-2000MS Base Unit that this phone is designed to work with.
Display Name
• Press the Menu Key
• Enter in a Display Name for the phone
ADSL Dialup
Some Internet Service Providers (mostly ADSL) use PPPoE which requires that the user enter in an ID and a password to access the
Internet. In this case, Enable ADSL DIALUP and enter the PPPoE ID and PPPoE password.
To Enable ADSL Dialup
• Press the Down-Arrow key
• Use the Right-Arrow key to select Enable
Setup ADSL ID
• Press the Down-Arrow key
• Enter the ADSL ID
Setup ADSL Password
• Press the Down-Arrow key
• Enter the ADSL Password
D-Link DPH-15MS User Manual

Setting Up the IP Phone Manually

software program only. In addition, some of the features listed in the Web Interface are
™
1