D-Link AirPlus DI-614+ Manual page 63

Networking Basics
Naming your Computer

In this window, enter the
Computer name.

Select Workgroup and enter the
name of the Workgroup.

All computers on your network
must have the same Workgroup
name.

Click OK.
Assigning a Static IP Address in Windows XP/2000
Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to
the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technol-
ogy. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP
Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a Static
IP Address, please follow these instructions:

Go to Start.

Double-click on
Control Panel.
OK
63