D-Link DVG-1402S Quick Installation Manual page 5

Connecting the DVG-1402S directly to a
Modem and a Computer (continued)
e. Attach one end of the Ethernet Cable (blue) provided in this package to the LAN or
Ethernet Port on the Cable/DSL Modem.
f. Attach the other end of the provided Ethernet Cable
to the WAN Port of the DVG-1402S.
g. Attach one end of the provided phone cable (black) to a standard analog telephone.
h. Attach the other end of the phone cable to the phone
port labeled 1 on the rear panel of the DVG-1402S.
i. Reconnect the power to the Cable/DSL Modem (Plug in or turn on the power switch).
j. Connect the Power Adapter to the Power Connecter
on the DVG-1402S.
k. Connect the other end of the Power Adapter to an
available electrical outlet (Wall Socket or Surge
Protector).
l. Restart your PC.
• If your ISP registers your computer's MAC address, see the section labeled MAC
Cloning for Cable Connections in the user manual on the CD-ROM.
• PPPoE Users, please continue to the next page for additional configuration steps.
Hardware configuration is complete! If your VoIP service is already activated, you can
make phone calls now.
5