D-Link DSL-G604T User Manual page 33

Wireless adsl router

Hide thumbs Also See for DSL-G604T:

Table of Contents

Connection Type: Static IP Address

After selecting Static IP Address, it will direct you to the information menu. Do not change the VPI or

VCI value unless you have been told to do so. These numbers are used to define a unique path for your

connection. If you have been given specific settings for this to configure, type in the correct values

assigned by your ISP.

Change the IP Address, Subnet Mask, Gateway Address and (if available) Secondary DNS Server

IP address as instructed by your ISP. Your ISP should have provided these IP settings to you..

Select the Connection Type from the pull-down menu under the Static IP heading. Your ISP should

provide this information to you. The available options are IPOA, 1483 Bridged VC-Mux, 1483 Bridged

LLC, 1483 Routed LLC, and 1483 Routed VC-Mux. If have not been provided specific information for

the Connection Type setting, leave the default setting.

Click Next to proceed to the next page.

Connection Type: PPPoE/PPPoA

Type in the Username and Password used to identify and verify your account to the ISP.

After selecting PPPoE/PPPoA, it will direct you to the information menu. Do not change the VPI or

VCI value unless you have been told to do so. These numbers are used to define a unique path for your

Table of Contents