Table of Contents
Advertisement
Troubleshooting
If the player fails to perform as described in these operating instructions, use
the following troubleshooting guide to fix the problem:
The buttons are not functioning
§ Check to see if the battery is installed properly. Check the + and –
marks of the battery.
§ Check to see if the battery is dead. You may need to replace the
battery.
§ Check to see if the HOLD switch is set to the HOLD position.
§ Check to see if the memory is initialized. Initialize the player using
DMP-210/220 Manager.
§ Try reinstalling the battery. Sometimes you will need to reinstall the
battery to reinitialize the player.
Unable to download data
§ Make sure the USB cable is properly connected to your PC and the
DMP-210/220.
§ Check that the USB driver is installed. If it is not installed, install the
USB driver.
§ Make sure there is sufficient available memory. Click on the Update
button to check the remaining memory capacity and check the size of
the files stored in the player.
Lost or Corrupt Data
Occasionally, some parts of a data stream may be damaged because of
instability of power while downloading files, or the USB cable was
disconnected while downloading files. In such a case, initialize the memory
in the player using the DMP-210/220 Manager.
24
Advertisement
Table of Contents
