Installing The D-Link ® Media Server Software - D-Link DSM-120 User Manual

DSM-120 User's Manual
Installing the D-Link
To share audio files from your computer, it is necessary to install the D-Link
Server software on the PC that contains the files you want to share. The D-Link
Server software allows you to point to the folders on your PC's hard drive that contain the
audio files you want to share.The D-Link
to your DSM-120 via your wired/wireless network connection.
Currently the DSM-120 only connects to one Media Server at a time. If more than one PC
contains files you want to share, you can select one of the following options:
1. Copy all of the files to one computer designated to run the D-Link
Software.
2. Map network drives from the computer with the D-Link
additional computers that contain files you want to share. This method also allows you
to share files from computers that cannot run the D-Link
as Macintosh systems. The computer running the D-Link
always be on when streaming content from any computer.
3. Install the D-Link
server at a time. To connect to another server, you must go into the Setup and change
the Default Server.
To install the D-Link
Note: If you have a version of the D-Link
uninstall the software and restart your system before installing a newer version of the software.
D-Link Systems, Inc.
Media Server Software
®
Media Server software then streams the information
®
Media Server software on each computer.You can only connect to one
®
Media Server software, follow the steps on the following pages.
®
Media Server already installed on your system, please
®
Installing the D-Link Media Server Software
®
Media Server software to
®
Media Server software such
®
Media Server software must
®
Media
®
Media
®
Media Server
®
15