Managing D-Link Dfl-1100; Resetting The Dfl-1100 - D-Link DFL-1100 User Manual

Managing D-Link DFL-1100

When a change is
made to the configuration,
a new icon
Activate Changes will
appear. When
changes made by the
administrator
complete, those changes
need to be saved and
activated to take effect by
clicking on the Activate
Changes button on the
Activate Configuration
Changes page.
firewall will save
configuration and reload
it, making the
changes take effect. In
order to make
changes permanent, the
administrator must login
again. This has to be
done before
configurable timeout has
been reached, otherwise
the DFL-1100 will revert to the previous configuration. The timeout can be set on the Activate
Configuration Changes page, by choosing the time from the dropdown menu.

Resetting the DFL-1100

To reset the DFL-1100 to factory default settings you must do so through the Web UI or
the Console Interface. Refer to the section on resetting the DFL-1100 to factory default
settings for more information. After the reset procedure has been carried out the DFL-1100
will be configured at factory default settings, with a LAN IP address of 192.168.1.1. Connect
to the firewall using a PC configured for DHCP connected to the LAN port in order to complete
the Configuration Wizard.
named
all
are
The
the
new
the
a