Table of Contents
Advertisement
Section - Command Line Interface
Set Netmask Command:
Command Name:
Command description:
Command Format:
Example:
Set DHCP Command:
Command Name:
Command description:
Command Format:
Example:
Set Gateway Command:
Command Name:
Command description:
Command Format:
Example:
Set DNS Server Command:
Command Name:
Command description:
Command Format:
Example:
D-Link DVX-1000 User Manual
set netmask
The 'set netmask' command is used for setting the netmask statically.
set netmask <net mask>
set netmask eth0 255.255.255.0
set dhcp
The 'set dhcp' command sets the network configuration (such as IP address,
netmask, etc) using DHCP.
set dhcp
set dhcp
set gateway
The 'set gateway' command configures the default gateway.
set gateway <gateway ipaddress>
set gateway 192.168.10.6
set dnsserver
The 'set dnsserver' command configures the primary & secondary DNS server
address.
set dnsserver <primary dns server ipaddress>
<secondary dns server ipaddress (optional)>
set dnsserver 192.168.10.5 192.168.10.6
1
Advertisement
Table of Contents
