Using The Configuration Utility - D-Link DWL-520 Manual

Using the Configuration Utility
D-Link Air DWL-520 uses the Configuration Utility as the management software.
The utility provides the user an easy interface to change any settings related to the
wireless adapter. After you have completed the installation of the DWL-520 (refer to
the Quick Installation Guide that came with your purchase) whenever you start the
computer, the Configuration Utility starts automatically and the system tray icon is
loaded in the toolbar (see illustration below*.) Clicking on the utility icon will start the
Configuration Utility. Another way to start the Configuration Utility is to click on
Start>Programs>D-Link Air>D-Link Air Utility.
If you are using Windows XP, you can use either the Zero Configuration Utility or the
D-Link Configuration Utility.
To use the D-Link Configuration Utility with XP, right-click
on the Wireless network icon in the taskbar in the lower
right-hand corner of your computer screen.
In the window that appears, select View
Available Wireless Networks and click
the Advanced button. The screen at right
will appear.
Select the Wireless Networks tab.
Uncheck the box in the properties window
that enables windows configuration.
After you have done this, you can then use the D-Link
Configuration Utility with XP by clicking on the D-Link
Configuration Utility icon.
If the icon does not display in the taskbar, then click on
this icon on your desktop to open.
test1
test2
*Configuration Utility icon in
the system tray
11