D-Link DWL-520 Manual page 9

Getting Started (continued)
Setting up a Wireless Infrastructure Network
7
Please remember that D-Link Air wireless devices are pre-configured to connect
together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router.)
Install the D-Link Air DWL-520 wireless PCI adapter into an available PCI slot
on your desktop computer. (See the Quick Installation Guide included with
the DWL-520.)
Install the D-Link Air DWL-650 wireless Cardbus adapter into a laptop computer.
(See the Quick Installation Guide included with the DWL-650.)
If you wish, you may connect a computer that is equipped with an Ethernet
network adapter (such as a DFE-530TX+) to the router also.
A RADIUS Server is optional. Connect a RADIUS Server to your network to
use all the features of WPA. (Without a RADIUS Server you can still use the
WPA Pre-Shared Key mode.) RADIUS Authentication can also be provided by
another service provider over the Internet and remote to your network site.
2
6
3
5
1
4
9