Web Configuration
Factory Default Settings for the DWL-810
Operating Mode
SSID
Channel
Transmission rates
WEP enable
Administrator password
IP Address mode
IP Address
IP Subnet
username
Access the Web Configuration by opening the web-browser and typing in the
IP Address of the DWL-810.
http://192.168.0.30, as shown below:
•
Open the web browser
•
Type in the IP Address
of the Access Point
(The IP Address shown in the example above is the default setting. Use this IP address when
connecting to a network consisting of other D-Link devices set to their default settings. If you
have changed the IP Address of the DWL-810 to conform to a network other than one with D-
Link devices, at their default setting, then input that IP Address in the web browser, instead of
the default IP Address shown.)
•
Type admin
(lower case) in the
User Name field
•
Leave the
Password blank
•
Click OK
Ad-Hoc
default
6
Auto
No
Blank (no password needed)
Static
192.168.0.30
255.255.255.0
admin
The DWL-810 default IP Address is
Fig. 6.1
Connect to 192.168.1.99
Fig. 6.2
17
http://192.168.0.30
admin