D-Link DWL-810 User Manual page 35

Networking Basics
Assigning a Static IP Address
Note: Residential Gateways/Broadband Routers will automatically assign IP
Addresses to the computers on the network, using DHCP (Dynamic Host
Configuration Protocol) technology.
Gateway/Router you will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a
Static IP Address, please follow these instructions:
• Go to Start
• Click on Control
Panel
• Select Network
and Internet
Connections
• Select Network
Connections
If you are using a DHCP-capable
Fig. 9.20
Fig. 9.21
Fig. 9.22
35