Connecting To A Wireless Network With A Wireless Router; Connecting To A Wireless Network In Windows 2000 - D-Link DWL-900AP+ User Manual

Networking Basics
Connecting to a Wireless Network
Connecting to a Wireless Network with a Wireless Router or an
Access Point using a static IP address in Windows XP.
Select Use the following IP address - if the Wireless Router or Access
Point does not have a DHCP server enabled.
Input a static IP address within the same
range as the Wireless Router or Access
Point.
IP address: 192.168.0.51
Subnet mask: 255.255.255.0
Default Gateway: Enter the LAN IP
192 168 0 1
address of the Wireless Router
192 168 0 1
Select Use the following DNS server
address. Enter the LAN IP address of
the Wireless Router.
Click OK
Fig. 8.28

Connecting to a Wireless Network in Windows 2000

Go to Start > Settings > Network and
Dial-up Connections > Double click on
D-Link AirPlus DWL-650+ Wireless Cardbus Adapter
the Local Area Connection associated
with the DWL-650+ > select Properties >
select Internet Protocol (TCP/IP) > click
Properties
Fig. 8.29