Injecting bursts of steam
Steam can cause scalding.
Do not open the door during bursts
of steam. Also, condensation on the
sensors will cause then to have a
slow reaction time.
Automatic burst of steam
Automatic burst of steam
display.
Once the preheating phase is complete,
the automatic burst of steam is injected.
The water will vaporize in the oven while
steam is being released and
steam active
will appear in the display.
After the burst of steam
completed
will appear in the display.
Continue cooking until the end of the
cooking duration.
1, 2, or 3 bursts of steam
Manual bursts of steam
If you have selected
release the bursts of steam as soon as
Start Manual burst of steam
display.
Please wait until the preheating phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Tip: Please refer to the recipes in the
recipe book for the timing of the bursts
of steam. Set the timer as a
reminder.
Select
Start Manual burst of steam
appears in the
Burst of
Burst of steam,
you can
Manual
appears in the
.
Moisture Plus
The burst of steam will be released and
Burst of steam active
display.
Proceed as described to inject further
bursts of steam.
Burst of steam, completed
the display after each burst of steam.
Continue cooking until the end of the
cooking duration.
Time-controlled steam
The oven will release the steam after
the specified amount of time.
will appear in the
will appear in
67