D-Link Xtreme G DWL-G520 Quick Installation Manual page 4

Installing the DWL-G520 Wireless PCI
Adapter in Your Computer
A. Make sure to turn off your computer and unplug the power cord.
Remove the back cover of the computer.
B. Install the DWL-G520 carefully and firmly seat it into an available PCI slot
(which is usually "white" or "cream" colored).
C. Secure the DWL-G520 back panel shield with a screw.
D. Replace the computer's cover.
E. Place the computer back in its normal position.
F. Attach the DWL-G520's antenna to the socket on the back panel shield.
Screw Mount
The screw to secure
the PCI Adapter to
the back of your
computer will fit in
this slot
Back Panel Shield
Once properly installed,
this panel should be at the
back of your computer.
Antenna
Used to wirelessly
connect to WiFi
networks.
Indicates that the DWL-G520 is
properly installed when the
computer is on and blinks when
data is being transmitted
4
To avoid damage caused
by static electricity, make
sure to properly ground yourself
by first touching a metal part of
your computer to discharge any
static electricity before working
with the DWL-G520 Wireless PCI
Adapter.
32-bit connector
This is the connector that fits
into the PCI slot on your
computer's motherboard
Link/Activity LED