Symbol; Specifications - Hitachi DH 14DSL Handling Instructions Manual

WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fi re. Please observe the
following matters when storing the battery.
Do not place electrically conductive cuttings,
○
nails, steel wire, copper wire or other wire in the
storage case.
Either install the battery in the power tool or
○
store by securely pressing into the battery cover until the ventilation holes are
concealed to prevent short-circuits (See Fig. 1).

SYMBOL

WARNING
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
Read all safety warnings and all instructions.

SPECIFICATIONS

POWER TOOL
Model
No-load speed Save/Power
Full-load impact rate Save/Power
Capacity Drilling
Rechargeable battery
Weight
Do not use the "SAVE" mode when boring holes with the wood drill. There is a likelihood
○
that the motor will burn out.
CHARGER
Model
Charging voltage
Weight
Concrete
Steel
Wood
BSL1430: Li-ion 14.4 V
(3.0 Ah, 8 cells)
Latch
Rechargeable battery
DH14DSL
0 – 750 /min / 0 – 1500 /min
0 – 3100 /min / 0 – 6200 /min
16 mm
13 mm
18 mm
2.1 kg
UC18YRSL
14.4 V 18 V
0.6 kg
27
English
Ventilation holes
Terminals
Battery cover
Fig. 1
DH18DSL
BSL1830: Li-ion 18 V
(3.0 Ah, 10 cells)
2.2 kg