Table of Contents
Advertisement
OPTIONAL ADJUSTMENTS
All Sony TVs are set for optimal viewing performance. Refer to the following
instructions if the customer requests additional adjustments.
ENABLING VCOM TO ADJUST THE PICTURE
The VCOM adjustment displays a Green screen while you adjust the picture.
1.
Take the TV out of deep Standby mode by pressing
turn on the TV.
POWER
2.
Press
to turn the TV back off.
3.
Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
DIGITAL
001 OP
000 VERS
<MAIN>
DM1.027AAA
WF1.002W00AA
DF3.130W00AA
YM1.409W00AA
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
MID:0D33A216
PID:040420C0
PNL:LTY460HQ0501
TUNER: ENABLE
KDL-40HX752/46HX752
SECTION 5 - UPDATES AND ADJUSTMENTS
5
+
POWER
Volume
SERVICE
---
<EXT>
AA
RF:0000
WF:9.2.1.12.4
WF:0A
FD:0.068
<PEM>
-------------------
-------------------
-------------------
-------------------
4.
Press
VPC menu displays.
5.
Press
POWER
to
6.
Enable the VCOM by pressing
7.
Press
8.
Change the value of the 001 ADJUST item to adjust the picture by
pressing
value.
NOTE: When changing the data value, the screen will turn green
for approximately 3 seconds before returning to the service
adjustment screen.
9.
When the picture is clear, press
(Save) the changes.
JUMP
OPTIONS
or
on the Remote Commander until the
2
to move to the 002 VCOM category.
VPC
SERVICE
002
VCOM
000
ENABLE
3
to increase the data value to 1.
1
to move to the 001 ADJUST item.
VPC
SERVICE
002
VCOM
001
ADJUST
3
to increase the data value or
VPC
SERVICE
001
VCOM
001
ADJUST
MUTING
VPC
WRITE
002
VCOM
001
ADJUST
0
64
6
to decrease the data
69
0
then
to WRITE
64
39
Advertisement
Table of Contents
