注意事项 App Store 是 Apple Inc. 的服务商标。 这款飞利浦产品和飞利浦智净家应用程 序已应用于多种开源软件,如需获取本 产品中所用开源软件副本的许可文本, 请访问以下网站: www.philips.com/cleanhome。 ZH-S...
Page 25
Contents 6 Replacing the filters 1 Important Filter replacement indicator Safety Replacing the filters Filter force reset 2 Your air purifier Changing filter type Product Overview Controls overview 7 Storage 3 Getting started 8 Troubleshooting Installing filters Wi-Fi connection 9 Guarantee and service Order parts or accessories 4 Using the air purifier Understanding the air...
Important it replaced by Philips, a service center authorized by Philips, or similarly qualified persons in order Safety to avoid a hazard. • Do not use the appliance Read this user manual carefully if the plug, the power cord, before you use the appliance, and or the appliance itself is save it for future reference.
Page 27
• Only use the original the plug of the appliance becomes hot. Make Philips filters specially sure that you plug the intended for this appliance into a properly appliance. Do not use any connected power socket.
Page 28
• Do not use this appliance • Do not use the appliance when you have used in wet surroundings or in indoor smoke-type insect surroundings with high repellents or in places ambient temperatures, with oily residues, burning such as the bathroom, incense, or chemical toilet, or kitchen.
2 Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Product Overview Air outlet cover Control buttons Air quality sensor Display panel NanoProtect filter...
3 Getting started Pull the top part of the side panel to remove it from the appliance. Installing filters Remove all packaging of the filters before using the appliance. Unpack them and place them into the appliance described as follows: Note Press the two clips down and •...
Put the pre-filter back into the Wi-Fi connection appliance. Setting up the Wi-Fi connection for the first time Download and install the Philips "Clean Home+" app from the App Store or Android market. Note Put the plug of the air purifier in •...
Page 33
• This App supports the latest Follow the steps 4-5 in "Setting versions of Android and iOS. up the Wi-Fi connection for the Please check www.philips.com/ first time" section. cleanhome for the latest update of supported operating systems and devices.
4 Using the air Most of the indoor air pollutants fall under PM2.5 – which refers to purifier airborne particle pollutants smaller than 2.5 micrometers. Common indoor sources of fine particles are tobacco smoke, cooking, burning candles. Some airborne bacteria Understanding the air and the smallest mold spores, pet quality light...
» The air purifier beeps. » The air purifier operates With an advanced gas sensor, a under the Pollution mode display ranging from L1 to L4 shows by default. the level change of potential harmful » When the air purifier is gases (incl.
Formaldehyde mode Changing the Auto mode setting The unique Formaldehyde mode is designed to quickly remove your You can choose the Pollution mode indoor formaldehyde and maintain ), the Formaldehyde mode ( it at safe level. or the Allergen mode ( •...
Manual Changing the fan speed • Touch the fan speed button repeatedly to select the fan In addition to the Auto modes, there speed you need: are several fan speeds available. (Speed 1) When using the manual fan speed (Speed 2) settings, the air purifier will still (Speed 3) monitor the air quality, but it will...
Touch the light on/off button Turbo all lights will be on again, In Turbo mode, the air purifier operates on the highest speed. • Touch the fan speed button select the Turbo mode. » The turbo speed indicator goes on. Setting the child lock Touch and hold the child lock button...
5 Cleaning Cleaning the body of the air purifier Regularly clean the inside and Note outside of the air purifier to prevent • Always unplug the appliance dust from collecting. before you clean it. Use a soft, dry cloth to clean •...
Reattach the cover properly. Clean the inlet and outlet of the air quality sensor with a soft brush. Cleaning the air quality Open the air quality sensor sensor cover. Clean the air quality sensor every two months for optimal functioning of the appliance.
Reattach the air quality sensor Press the two clips down and cover. pull the pre-filter towards you. If the pre-filter is very dirty, use Cleaning the pre-filter a soft brush to brush away the dust. Then wash the pre-filter Clean the pre-filter when F0 is under running tap water.
6 Replacing the Note filters • To optimize the lifetime of the pre-filter, make sure it air dries completely after cleaning. • Wash your hands after handling the filter. Filter replacement • Make sure the side with the two indicator clips is pointing towards you, and that all hooks of the pre- filter are properly attached to...
• Do not clean the filters with a vacuum. • If the pre-filter is damaged, worn or broken, do not use. Visit www.philips.com/support or contact the Consumer Care Center in your country. Note • Do not touch the pleated filter...
Place the new filters into the air Touch and hold purifier. 3 seconds to force reset the filter lifetime counter. Put the plug of the air purifier in the power socket. Touch the button to switch on the appliance. Touch and hold the reset button for 3 seconds to reset the filter lifetime counter Note...
Changing filter type Note • After you have selected the filter Touch simultaneously code of the new filter using the for 3 seconds to enter the filter button, if you do not touch type change mode. any other buttons in 10 seconds, »...
Storage Turn off the air purifier and unplug from the power socket. Clean the air purifier, air quality sensor and pre-filter (see chapter ‘Cleaning’). Let all parts air dry thoroughly » if you don't have the second before storing. filter, just tap and hold for 3 seconds to confirm the Wrap the filters and pre-filter filter code and exist the filter...
8 Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country. Problem Possible solution • Check if the top cover is properly installed. The appliance •...
Page 48
The appliance filters, contact your Philips dealer or an authorized produces a Philips service center. The filter may produce smell after strange smell. being used for a while because of the absorption of indoor gases. It’s recommended that you reactivate the filter by putting it in direct sunlight for repeated use.
Page 49
Problem Possible solution • If the router your purifier is connected to is dual – band and currently it is not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair your purifier again. 5Ghz networks are not supported.
If Compliance with EMF there is no Consumer Care Center in your country, go to your local Philips Koninklijke Philips N.V. dealer. manufactures and sells many products targeted at consumers,...
Notice App Store is a service mark of Apple Inc. This Philips appliance and Clean Home+ app applied multiple open source softwares, Copies of open source software license text used in this product can be derived from website: www.philips.com/...