Replacing The Battery; Celsius/Fahrenheit Option - Motorola CARE MBP66N User Manual

3-in-1 non-contact baby thermometer
Hide thumbs Also See for CARE MBP66N:
Table of Contents

Advertisement

10. REPLACING THE BATTERY

Low battery warning:
When the battery power becomes low, the low battery symbol will
appear on the display. The thermometer can still be used during
this time, but the batteries should be replaced as soon as possible.
If the batteries run out completely, "Lo" will be displayed along with
the low battery symbol. In this case, the batteries will need to be
replaced before using the thermometer again.
Replacing the Battery:
1. Gently slide the battery cover back.
2. Carefully remove the old batteries and
properly discard.
3. Insert new batteries (2 x 1.5V AAA size
alkaline batteries) according to the
proper polarity.
4. Slide the battery cover back on.
Note:
1. Please properly dispose of the batteries away from small children and
heat.
2. It is recommended to remove the batteries if the unit will not be used
for an extended period of time.
3. For long durations of non-operation, please remove all batteries from
the device.
4. Batteries must be disposed of in accordance with local environmental
and institutional policies.
5. Dispose of used batteries in accordance with the applicable legal
regulations. Never dispose of batteries in the normal household
waste.

11. CELSIUS/FAHRENHEIT OPTION

In standby mode, you can switch between Celsius (°C) and
Fahrenheit (°F) by pressing and holding the Forehead/Object
Memory
buttons at the same time.
Replacing The Battery
and
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents