Dell PowerVault MD3000 Hardware Owner's Manual page 50

Position the replacement physical disk into the disk carrier with the disk's controller board facing
b
the rear of the carrier.
From the rear of the carrier, slide the physical disk into the carrier until it contacts the stop tab at
c
the front of the carrier.
Secure the physical disk to the carrier using the four screws removed earlier. To avoid damaging
d
the carrier, do not overtighten.
Figure 4-3. Installing a SAS Physical Disk in the Carrier
1 screws (4)
2 With the physical disk carrier handle open, carefully align the channel on the disk carrier guide rail
with the appropriate disk slot keying feature on the chassis face plate, and insert the disk (see
Figure 4-2).
3 Push the physical disk carrier into the slot until the bottom of the open carrier handle makes contact
with the chassis face plate.
50
Installing Enclosure Components
1
2 physical disk carrier
2
3
3 physical disk